What is wrong with my washing machine? - diy washing machine shut off valve
Please help! My washing machine does not drain the water properly. Most of the drainage of the battery, and I am able to open the door, but the clothes are still full of water. My husband used to do all the DIY at home, but we are not together. I am totally at a loss what to do. Thank you very much. x
Wednesday, February 3, 2010
Diy Washing Machine Shut Off Valve What Is Wrong With My Washing Machine?
Subscribe to:
Post Comments (Atom)
This happens when the screen is on me, a door on the bottom, which has locked himself out of a leaf. He takes the water is discharged, remove the filter. I have a screwdriver, coins, etc. behind it, and accumulate to stop the leak.
ReplyDeleteLooks like the brushes, which are endangered, and not fast enough.
ReplyDeleteCheck the filter blocked, so that the first is to make sure they do not, but it sounds like the brush for me.
The way to check is to see if its on. Normally, when you turn the speed of your normal washing increased speed. If no further increases their brushes.
The brushes are only about 25 pounds and not just the cost of repairing ridiculous.
EDIT.
The filter is usually somewhere in the front of the machine on the back. Normally there is a flap that opens to solve a hand.
But I still have the problem turns out to be a drainage problem.
If there is a removable filter in the machine and screw to see if anything in there (unplug the first machine and have some old towels, the water that is put out of Fang). Mina stopped after the drainage, because it is a hair tie easily wrapped around the screw in the filter. Check all pockets before washing.
ReplyDeleteMaytag man after my mechanic, sounds like the drain is clogged main house. Plus, the problem is not caused by the washing machine at all. when the water collects in the machine is usually the main drain line of the house, normally the problem. U can be a plumber to be the likely $ 175, or if they are useful for rent, 5 / 8 "snake a place to rent tools and to identify the snake out of line. In my area that rent for $ 50.
ReplyDeleteThis could be by various factors, including the rates are not balanced or too large causes. Make sure there is an overload of the machine. If you have a greater load or more "serious" elements of the machine (towels) in an attempt to balance the load in the bathtub, even for the weight and adjust the time of the spin-dry cycle again.
ReplyDeleteIf this fails, it can be folded AA or drain clogged. The drain hose is usually the machine formed with the pipe end in a reverse "U" appended to it, so it can hook right into the side of the sink or a washing machine drain hose.
You can also replace a flight tube, if it sounds bad. So: http://www.apwagner.com
Many machines to describe pump as much water as before, go into a spin to remove the remaining water. Too hard to turn when they filled with water. She has not indicated when the dishwasher to turn yet.
ReplyDelete